Zeiss N HBO 103 Specifiche Scaricare il pdf (Pagina 15)

Microscope Illuminating System Start-Up

HBO 100 HBO 100 Carl Zeiss

B 46-0063 e 03/06 13

3.2 Start-Up of HBO 100

Microscope Illuminating

System

1 Connector for HBO 100 illuminator

2 Power connector

Fig. 5 Rear of transformer for HBO 100

1 LED LAMP

2 LED TEMP

3 LED SAFETY

4 LED +12V

5 Reset key

6 Display of operating hour meter

7 POWER switch with integrated power indicator LED

Fig. 6 Front of transformer for HBO 100

Do not look directly into the lamp or its

reflected light.

Procedure:

• Install the HBO 100 microscope illuminator

on the microscope (see Operating Manual

of microscope).

• Connect the microscope illuminator to the

transformer as described in the supplied

operating instructions:

Fig. 5

• Connect the transformer to the power

outlet using the provided power cable.

• Switch on the microscope illuminator using

the power switch at the front of the

transformer; the lamp will ignite

automatically:

Fig. 6

Function of the luminescence diodes:

"POWER" Lights when instrument is switched

on.

"LAMP" Lights when the lamp has been

ignited and is lighting.

"TEMP" Lights when the temperature

inside the transformer is within the

permissible range.

"SAFETY" Lights when the safety circuit of

the lamp housing is closed.

"+12V" Lights when the additional voltage

of the transformer is within the

permissible range.

Operating hour meter/"Reset" key:

Pressing the "Reset" key will reset the

operating hour meter to "0". This must be

done after every lamp change. To avoid

resetting the meter by mistake, the key can be

actuated only with an appropriate tool (e.g. a

small screwdriver).

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Commenti su questo manuale

Nessun commento